Five (5) standard models to choose from for R-2, R-5, R-6,
MR-6 and R-10 wire drawing dies. Special R-12 also Available
Pressure die holders are designed to force lubricant under high
pressure onto the surface of the wire during the drawing practice.
Most effective when used in conjunction with WILCO Lubricant
Applicators on any type of material drawn with powdered
lubricants. Simple installation using standard WILCO holding
sleeves or water cooled receptacles.

We also specialize in manufacturing custom Pressure Die
Receptacles for all manufacturers' wire drawing machines. 

Click the PDF link to see our typical water cooled receptacles: